The Ultimate Guide to Earring Findings!
As a jewelry maker, you must have some earring finds to make pearl earrings. There are different types and I’m going to talk about them today.
This is the ultimate guide to earring discovery. By the end of this article, you will know all types of earrings to make your earrings.
The earrings’ findings aren’t new, but they have evolved over the years. First popular with men from the Persian Empire, it stayed that way for centuries until the tables finally turned and women began to dominate earrings. Piercing reached new heights in the 1970s when nurses attended department store ear piercing parties, reducing the need for home needles and needle piercings. a prayer that infections will not occur. Eventually, piercing guns were invented and improved sterilization techniques were used to further encourage the adoption of fashionable piercings.
Earrings: These types of earrings create the illusion of floating on an earlobe. They are also the first earrings you wear after your ears have been pierced. Post earrings are made up of the post that goes through the piercing and the ornament that is fused or welded to the front. Designs can be enhanced with dangling rings for trailers. Post earrings stay in place with a pocket or butterfly holder.
Hooks and threads for earrings – vary widely and can be divided into two groups; Security and not security. The nice thing about the hooks is that they allow the earring to move freely, which means plenty of oomph and shine, which is great for dramatic looks and the evening. The snap hooks have a positioning function, which means that once the wire passes through the ear, it is somehow secured to form a closed loop. In the event the earring gets caught and stuck on something, these accessories should ensure that your jewelry stays in place.
Ear hooks: These long earrings slide into the ear and out the opposite side so that the pendants appear on the front and back of the lob for an interesting illusion effect.
Threaded Accessory – This is an extension of the standard hook and can be in the form of a thread or a chain. They have been particularly popular with designers in recent years, using oversized thread through yarn as an extension of the design itself for a dramatic effect.
Our mesh accessory chain can be adjusted to fit any length and is best for lightweight designs that benefit from a lot of movement. They are a great example of form and function in an attractive find.
Metal Tires – These inexpensive, lightweight tires are great for adding metal beads or threads. Metal circles usually have a flattened end and are drilled so that the end of the hook fits into the hole. Or they can have a circular loop on one end to receive the folded locking hook. Metal tires come in all shapes and sizes.
Articulated hanger: They are a more expensive and higher quality type of earrings. These earrings have a hinge that locks them securely into place. Joint rings often consist of hollow tubes or solid cast parts. The larger area of the tires allows for more elaborate patterns, shapes, and designs.
Clip-on earrings consist of a two-part folding mechanism that can be purchased as a whole or individually, depending on how you work. The base of the bracket is soldered to your earring, and then the paddle attached to the ear is pushed into place as shown in the image below. The tension that creates the “snapshot” is generated by the central bar of the pallet, which if necessary must be adjusted with tweezers until the perfect resistance is achieved. (It may take a little practice). These pads come in a variety of sizes, but can get very thick and are more suitable for nail designs. So keep that in mind when considering an option.
Filled for a non-piercing ear and great for dropper and chandelier styles. (As the name suggests, the earring is held in place with a simple screw action that can be adjusted for more comfort.) The mechanism is much softer than a standard clip. So if you are looking for something that converges less “threaded connections are perfect. The design itself is very simple and doesn’t require assembly. You just have to tie the design of your choice by hanging it by the tie or by the cup and Attach a pin at the front.