Learn how to solder a chain!
Do you want to know how to weld a chain? Well, it’s a dodgy business, but our step by step guide will make it quick and easy for you to find it. Soldering your circuits isn’t easy, but don’t worry! We’re here to help you master the art of welding.
Whether a large part of your business is jewelry chain repair or you’re working to create your chains from scratch, this makes sure you have all the experience and tools you need for a successful clean, and professional finish. There’s a reason many jewelers don’t make their necklaces from scratch. Simply put, this is a difficult skill to master! Once you master this technique, you will become a sought-after metal craftsman who can create some genuinely unique crafts that will always be a great selling point for your customers.
Welding chain: tools required
Torch for soldering jewelry
Welding suitable for the alloy you are working with
Reverse action tweezers
Adaptation is important. Due to the complexity of chain welding, make sure you are happy with your setup, as it can affect your welding technique’s efficiency. Reverse acting clamps should always be held by the solder block. It is best to do this so that you can grab one link in the chain precisely while the rest of the chain is safely removed. This way, all other connections are kept away from any heat source, and you can be sure your chain is not going anywhere during the chain welding process.
Use a fine black marker to mark the links of the chain link. This makes it easier for you to determine where you want the solder to flow.
Make sure all joints are straight. To get the best possible solder joint for the chain links, make sure they are perfectly aligned and as tight as possible. Like a jump ring, you can twist both ends of a chain-link neatly so that the connection is almost invisible before soldering.
Take your welding probe. Apply flux to the end of the welding probe and preheat it with a welding torch.
Apply solder. Put a small rod of solder on the end of the probe and heat it until the solder flows. Then remove it from the stove immediately.
Place the solder on the link of the chain. Do you remember how you made those black marks? This should help you quickly determine where to place the solder. Gently touch the solder at this black mark.
Heat again. This time, however, be sure to apply the heat about 10mm away from the solder. This will provide enough heat for the solder to flow.
Repeat if necessary. Keep using this technique to get the best possible weld.
Soldering jewelry can be intricate, especially when working on such a small scale. Now that you have a step-by-step guide to an old metalworking hack, welding chain links should always be more manageable.
Get all the welding equipment and accessories you need from a local and online retailer. And when you’re perfecting your chain-based designs, be sure to check out all of our loose chains, accessories, and clasps to craft quality jewelry.
Now you can make jewelry yourself and try to make a unique chain! Be careful when using any tools, and always wear protective gear to avoid accidents. Soldering can be challenging, but once you’ve got it right, you’ll love it! If you like the design, don’t worry. Join our family today! Here, how to weld a chain.