+16466875440 [email protected]

Casting


Casting is performed utilizing a multi-step procedure which entails specialized equipment and a huge understanding of how valuable metals, such as platinum melt.

The casting procedure involves the following measures:

Step 1

3D Print model & casting preparation. A bit of jewelry starts with the inception of a 3d print version of what the final piece will look like. This version is attached into a wax stem from a sprue which will form the station whereby the molten platinum matches into the mould. Occasionally multiple wax versions will probably be attached to the identical stem for numerous castings.

Step 2

Pouring. When the wax version is put on a stem, then it's set in a flask and an investment substance is poured around it. Following the investment substance sets, it will become the mould the liquid platinum is going to soon be poured into. Using suitable investment substances in platinum casting is very important due to the high heat where platinum melts.

Step 3

Burning out. Before casted metal could be poured into the mould, nevertheless, the wax model has to be burnt out at a particular kiln. When all the wax is melted and burnt off, it leaves a pit in the investment substance which functions as the mould.

Step 4

Melting. There are numerous common alloys typically utilized in casting. When the metal is melted, it may be poured into the mould or pressured in utilizing one of many practices.

Step 5

Casting. Vacuum-assisted casting pulls up metal into the mould with using suction. Pressure casting puts the flask in a pressurized chamber. The Accessory Consultant uses all three of those methods in addition to flashlight casting, which uses a flashlight to melt a tiny quantity of metal that's poured into a mould. The investment could be hammered, crushed having a water jet or vibrated, or producers can utilize a remedy to split it. The sprue on every bit is cut away and simmer for future castings, and the final item is cleaned up to eliminate any imperfections.

Step 6

Uncovering. This entails removing the casting out of the investment, either by chemical or physical means. The investment may be hammered, smashed having a water jet or vibrated, or producers may utilize a remedy to dissolve it. The sprue on every bit is cut away and simmer for future castings, and the final item is cleaned up to eliminate any imperfections.

We offer 6 types of Casting:

1. Platinum Jewelry Casting

2. Gold Jewelry Casting

3. Palladium Jewelry Casting

4. Silver Jewelry Casting

5. Brass Jewelry Casting

6. Stainless Steel Jewelry Casting

Quality and consistency are guaranteed by utilizing just the most perfect of crude materials, the most recent projecting innovation, and an accomplished group of committed experts that can handle the most troublesome projecting positions.

Through progressing innovative work of combinations and cycles we can give a wide scope of projecting arrangements, including specific projecting composites, HTV and RTV forming administration, wax resizing, and structure privacy.

From a solitary cast to different runs for large scale manufacturing, from a metal ace to a hand-cut wax or a CAD delivered ace, our point is to be the excellent provider of value valuable metal projecting administrations to the jewelry business.

The Accessory Consultants' scope of projecting composites has been created in view of the assembling gem dealers' needs. At every possible opportunity, we have made a compound that can be resized, pounded effectively, stone set, or even remelted and worked as a manufacturing amalgam.

Most jewelry casting services handle what is designated "lost wax" speculation projecting. The "lost wax" measure goes back a few thousand years. The primary wax utilized originated from honey beeswax! To start the cycle of lost wax projecting; a model is made of the ideal piece. This can be a previous thing or from another plan. The wax model or ace is created from the underlying craftsman's model. The ace can be projected straightforwardly or used to make a shape.

When the pieces to be projected are mounted on a tree, the tree is then embedded into a cup. The jar is fixed and a venture blend is poured around the tree. After the speculation is adequately solidified, the carafes are transformed either in a liner or in a furnace to dissolve the wax. The wax is along these lines "lost", thus the determination of the "lost wax" name. The jars are then positioned in a programmable oven where the speculation shape is completely terminated, leaving it open for the picked metal to be poured in.

When the metal has cooled, the cup is drenched in water and exposed to high compel washing to eliminate the majority of venture material. The structure will at that point be cut from the tree and can continue to wrapping up. Projecting jewelry requires understanding the liquefying purpose of different metals, how to deal with material, for example, silicone and natural elastic, and the planning cycle.

All main alloys:

1. 925 Sterling Silver

2. Reduced Fire Stain 925 Sterling Silver

3. 9ct Yellow, White, Red Gold – 100% Recycled Gold

4. 9ct Yellow, White, Red Gold – Fairtrade

5. 14ct Yellow, White (High Palladium), Red Gold – 100% Recycled Gold

6. 18ct Yellow, White (High Palladium), Red, Gold* – 100% Recycled Gold

7. 18ct Yellow, White (High Palladium), Red, Gold – Fairtrade

8. 22ct Yellow Gold – 100% Recycled Gold

9. Platinum

10. Palladium

Our customers and employees have enabled our growth and have established our reputation for always delivering the highest quality castings at a competitive price. Every client from the jewelry designer to the largest manufacturer is treated with the same individual care and attention. Our specialist individually assesses each project, large or small to provide you with optimum results and trouble-free castings.

The following chart explains how much gold is present in the different karats:

  • 24K = 99.9 percent gold
  • 22K = 91.6 percent gold
  • 18K = 75 percent gold
  • 14K = 58.5 percent gold
  • 10K = 41.7 percent gold
  • Some of the gold metals that we currently work with when it comes to gold casting jewelry services include:

  • Gold Filled
  • 10K or 14K Yellow Gold
  • 18K Yellow Standard Gold
  • 18K Yellow-Yellow Gold
  • 22K or 24K Yellow Gold
  • 14K or 18K White Standard Gold
  • 14K or 18K White X-1 (rhodium optional) Gold
  • 14K or 18K White with Palladium Gold
  • 14K Rose Gold
  • 14K Soviet Red Gold
  • 14K or 18K Green Gold
  • CONTACT US

    Contact The Accessory Consultant


    We’re here to help and answer any question you might have. We look forward to hearing from you



    FILL THE FORM